Supplying used food processing machinery wince 1952, with over six warehouses of used food processing equipment IN STOCK!

Alard logo
ALARD EQUIPMENT CORP.
6483 Lake Avenue
Williamson, NY  14589  U.S.A.

315-589-4511 (voice)   315-589-3871 (fax)

Fresh Cut Equipment Listings


A sampling of the new, refurbished, and good used food processing and packaging equipment items we have available for sale  for fresh-cut and pre-cut produce processing and packing applications, for fruit, vegetables, and leafy vegetable products; for companies that prepare pre-cut fresh salads, precut fresh vegetable items, or prepared fresh fruit products, and/or "wet salads". We may from time to time show items we have listed available for sale elsewhere, but nearly all of what you will see here is available from our on-site inventory.

These pages list a only a fraction of the equipment we have in stock and/or available for sale elsewhere.
CALL
315-589-4511 to discuss YOUR particular fresh produce processing and packaging machinery need.

Click here for instructions!
A B C D E F G H I L M O P S T U V W
HOME   Email us     SEARCH

See our full GENERAL LISTINGS Page



A - Accumulation, Air Blowers, Air Cleaners, Air Compressors, Air Dryers, Air Fans, Apple, Augers
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

AIR COMPRESSOR- 075 HP, screw, 100/110psig, air cooled, SULLAIR, Model 16BS-75L ACAC. (Z8834)

ALIGNER-FEEDER - 36"W x 8'L, 3"W x .75"H aligning ridges, non-stick dimpled rigidized surface, Key Iso-Flo, all SS, 1HP (Y5423)

APPLE SLICE WASHER - Pease wedge washer with elevating discharge conveyor, all stainless steel, 96"L x 16"W x 16"D tank, good cond. (Y4280)



B - Bag Inserters, Bag Sealers, Baskets, Bean Graders, (Unsnipped) Bean Remover,
Bean Snippers, Blanchers, Boilers, Bottle, Braising Pans, Breaders, etc.
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

BAG FILLER or BAG FILLER-SEALER- See "FILLER, bag" below...

BAG SEALER- continuous band, Doboy model CBS-B, dual heat controls, 1/4" flat seal, varispd, GOC. (Y5662)
BAG SEALER- continuous band, hot air, Fischbein-Saxon Model SH1000/SH2000, mfg rates to 555 inches/min up to 12 mil thick, EXC cond. (Y5535)
BAG SEALER- continuous band, Packrite, Bandrite, Model 6000, USDA, SS, 3/8" flat seal, R-L flow, SS adjust ht stand,  in-stock NEW! (Y5628)
BAG SEALER- continuous band, Packrite, Bandrite, Model 6000, USDA, SS, 3/8" flat seal, L-R flow, SS adjust ht stand,  in-stock NEW! (Y5650)
BAG SEALER- continuous band, PACKRITE, Model 6000, config to spec, avail w/coder, trimmer, SS adjust height stand, etc. NEW! (Z4387)

BAG SEALER- vacuum, gas-flush, semiautomatic, CVP A300, 32" seal bar, USDA food grade sanitary, on adj angle / adj ht SS stand, EXC cond. (Y4861)
BAG SEALER- vacuum, gas-flush, semiautomatic, CVP A300, 26" seal bar, USDA food grade sanitary, on adj angle / adj ht SS stand, w/shelf, EXC cond. (Y5074)

BAG SEALER- other, GAS BLENDER, (2) gas, 700 scfh (330 lpm), CO2/O2 only proportional blender, SS shrouded, SMITH EQUIPMENT, Model 299040F. (Y0697)

BEAN SNIPPER - Intermediate, LYCO, all SS, with optional cleaning brush, mfg rated to 3,000 lbs/hr, 3HP 3ph. (Y3397)

BIN DUMPER - See DUMPERS below...

BLENDER - (See
MIXERs below!).

BRUSH WASHER- 04 brush SCRUBBER rolls, continuous stainless steel, 3 HP electric chain-sprocket drive, 1,500-2,500 lb/hr potatoes, in-stock new. (Y5592)

 

C - Cabbage Cutters, Can Crushers, Can Openers, Cartoners, Case Erectors, Case Sealers, Checkweighers, Coders, Conveyors, Coolers / Chillers, Corers, Corn Huskers, Cutters, etc...
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

CABBAGE CORER - rotary, 28/min, hand-fed, all stainless steel, with knives for kraut or slaw, Alard-Smith, NEW. (Y0261)

CABBAGE CUTTER - 26-inch, for coleslaw, sauerkraut & sandwich lettuce shreds, ctr-rotating plow, Commercial NS26, SS drives, refurbished, in stock. (Y5435)
CABBAGE CUTTER - 26-inch, for coleslaw, sauerkraut & sandwich lettuce shreds, ctr-rotating plow, Commercial NS26, SS drives, refurbished, in stock. (Y4498)
CABBAGE CUTTER - 26-inch, for coleslaw, sauerkraut & sandwich lettuce shreds, ctr-rotating plow, Commercial NS26, SS drives, NEW in stock. (Y5337)

CHECKWEIGHER - belt xfer, 8"W x 12"L weigh section, 10 grams to 5.5 lb cap, reject sys, touch-screen, exc cond. (Y5356)
CHECKWEIGHER- chain xfer, TWO-LANE, ea w/2-chain xfer cnvyr, 3.5"W x 13"L weigh-cells, all SS construction, Cintex Model CS4000 IQC. (Y0864)

CHEESE SHREDDER- Fitzpatrick GUILO-RIVER model 20 4Dx4L, chipper, shredder, PRE-BREAKER, 5HP, SS contacts. (Y5208)
CHEESE SHREDDER- HALLDE, Model FC-300 "Magnum", SS & alum const, mfg rated to 7,700 lb/hr. NEW. (Z9049)

CHILLER - see "COOLER" below...


COLOR SORTER, Bueller Sortex Niagara mod NIAGD-213, cameras missing but rest of electronics appear intact, parts machine, as-is only. (Y4688)


CONVEYOR- belt, 6"W x 8.5'L rubberized food grade belt, all SS, dual side rails, variable speed drive, in-stock new. (Y5629)
CONVEYOR- belt, 6"W x 8.5'L rubberized food grade belt, all SS, dual side rails, variable speed drive, in-stock new. (Y5651)
CONVEYOR- belt, 48"W x 15'L plastic belt, all SS, 7"H SS sides topped w/UHMW strips, air header under belt at dischg., VG cond! (Y3652)

CONVEYOR- belt, elevating, 10"W x 84"L cleated belt w/3"H cleats on 12" ctrs, Z-shape, 8' disch ht, tapered inf hopper, in-roller drive, in stock. (Y5570)
CONVEYOR- belt, elevating, 12"W x 8'6"L cleated belt w/2"H cleats on 6" ctrs, 5.5' disch ht, tapered infeed hopper, 1HP, in stock new. (Y5516)
CONVEYOR- belt, elevating, 12"W x 8'6"L cleated belt w/2"H cleats on 6" ctrs, 5.5' disch ht, tapered infeed hopper, 1HP, in stock new. (Y5514)
CONVEYOR- belt, elevating, 12"W x 8'6"L cleated belt w/2"H cleats on 6" ctrs, 5.5' disch ht, tapered infeed hopper, 1HP, in stock new. (Y5517)
CONVEYOR- belt, elevating, 12"W x 17'L cleated belt w/1"H cleats on 10" ctrs, goose-neck, 9'L horz packing sect, 54"H discharge, ctrl bx, .75HP 3ph SS drive. (Y4755)
CONVEYOR- belt, elevating, 14"W x 6.5'L cleated belt w/2.5"H cleats on 12" ctrs, goose-neck, 2'L horz packing sect, 4'H discharge, ctrl box, .33HP 220v 1ph drive. (Y5673)
CONVEYOR- belt, elevating, 18"W x 14'L new trough-shaped white food-grade belt, shallow incline, 4'2"H dischg, all SS, 1HP 3ph drive, VG cond. (Z8683)
CONVEYOR- belt, elevating, 18"W x 18.5' cleated belt, goose-neck discharge, all SS, fractional HP drive, GOOD cond. (Y3625)
CONVEYOR- belt, elevating, 22"W x 6'6"L cleated flighted belt, bolted on infeed chute, dischg chute @ 46"H, all SS, like new. (Y4443)
CONVEYOR- belt, elevating, 11'Lx26"W, full flared hopper 48"W x 26" deep, all SS, 1HP 3ph roller drive, in stock EXC cond. (Y4381)

CONVEYOR- bucket elevator, 15' dischg ht, 4.5"L x 14.75"W x 2.5"D plas buckets, 5'L inf sect, 2'L dischg sect, all SS, EXC cond. (Y4327)

CONVEYOR- tabletop chain, 2-lanes each 10" wide x 78"L, counter-directional down & back config, all SS, w/drive, VGC. (Y5440)

CONVEYOR- rod belt, 15"W x 72"L, all SS, 3/16" rods, 3/8" spacings, 1/3HP drive, Dunkley, EXC cond. (Y5046)

CONVEYOR- screw auger, elevating, 10" diameter ribbon, 7 feet long, all SS, low-pressure jacketed, with covers, 2HP. (Y3783)
CONVEYOR- screw auger, elevating, 10" diameter ribbon, 7 feet long, all SS, low-pressure jacketed, with covers, 2HP. (Y3784)
CONVEYOR- screw auger, elevating, 12" diameter by 12'L screw, all SS, with hopper, covers, 1.5HP 3ph drive, EXC cond. (Y5495)
CONVEYOR- screw auger, elevating 16" diameter, 15'L, 8'H dischg, 4'x3'x4' hopper, all SS, Cozzini, exc cond. (Y5360)
CONVEYOR- screw auger, elevating, 26" diameter by 13' vertical lift, Vanmark Hydrolift, all SS, excellent condition. (Y4699)

CONVEYOR- vibrating, -- See VIBRATING CONVEYOR (below).

COOLER- falling film, Chester Jensen Instant Chiller, 3 plate, all stainless steel, in stock, in very good condition. (Y2141)


COOLER- flash, Lyco Easy-Flow continuous chiller, 3-zone, all stainless steel, in stock very good condition. (Y4302)
COOLER- flash, Lyco Easy-Flow continuous chiller, 4-zone, all SS, complete w/4 varispeed pumps, LIKE NEW condition. (Y4132)

COOLER- flume w/plate chiller, 24'10"L x 16"W x 8"D trough, (4) chill plates mounted o/h for full length chilling, all SS. (Y0799)

COOLER- sanitary water chill tank, 10'L x 40"W tank w/270'L SS coil in water, scavenger reel return, all SS, CMI flume water chiller. (Y1572)

COOLER - spray tunnel, Praxair spray tunnel, 22'L x 24"W belt, all SS, sprays over & under belt, air-knife at discharge, recirc pump, VG condition. (Y2106)

COOLER- vacuum chiller, Odenberg model 450, all SS, 450 liter batch capacity, incl vac pump, 2,500 lb/hr, VG cond. (Y4070)


CUP SEALER - vacuum, gas flush, Orics VGF-100, vacuum, gas-flush, semi-automatic, SS, USDA food grade,  EXCELLENT condition. (Y3712)
COOLER- vacuum chiller, Odenberg model 450, all SS, 450 liter batch capacity, 2,500 lb/hr, VG cond. (Y5306)

CUTTER - URSCHEL -- see below under "U" for URSCHEL slicers, dicers, Comitrols, cutters...

CUTTER- SPIRALIZER, Turatti Streamer vegetable pasta cutter, automatic, continuous, all SS, high-capacity, very good / excellent condition. (Y4827)

CUTTER - chopper, FMC tomato chopper, continuous, screw fed, knife/shear plate cutting machine, 10 HP, all SS. (Y4678)

CUTTER- dicer, 3-dimensional cut, cuts up to  3/4", can make strip cuts too, all SS, Eillert BL1000, EXC cond. (Y3098)

CUTTER- length, Kronen increment / segment cutter, semi-auto, hand fed, all SS, 1HP 3ph. VG cond. (Y4969)

CUTTER, SHREDDER- Fitzpatrick GUILO-RIVER model 20 4Dx4L, PRE-BREAKER, chipper, grinder, 5HP, SS contacts. (Y5208)

CUTTER, SLICER, SHREDDER - 26-inch, for coleslaw, sauerkraut & sandwich lettuce shreds, ctr-rotating plow, Commercial NS26, SS drives, refurbished, in stock. (Y5435)
CUTTER, SLICER, SHREDDER - 26-inch, for coleslaw, sauerkraut & sandwich lettuce shreds, ctr-rotating plow, Commercial NS26, SS drives, NEW in stock. (Y5337)
CUTTER- slicer, dicer, HALLDE, Model FC-300 "Magnum", SS & alum const, mfg rated to 7,700 lb/hr. NEW!! (Z9049)
CUTTER- slicer, dicer, shredder, DITO DEAN, Model TR-250, general purpose vegetable cutter, w/stand or as countertop, NEW. (Z2341)

CUTTER- wedge, Kronen HGW manual grid cutter, wedger, all SS, dual / 2 cutting heads, w/quartering blades, other cuts avail. Like new. (Y4628)

CUTTER - URSCHEL -- see below under "U" for URSCHEL slicers, dicers, Comitrols, cutters...




D - Destoners, Detectors, Dryers, Dumpers
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

DESTONER- wet-hopper, screw-feeder, Vanmark Hydrolift, 16" dia vertical auger elevator, 16 foot discharge height, all stainless steel, 2HP, good cond. (Y4109)
DESTONER- wet-hopper, screw-feeder, Vanmark Hydrolift, 26" dia vertical auger elevator, 13' dischg ht, all SS, 10HP, excellent condition. (Y4699)

DEPOSITOR -
also see "FILLER - piston" below...

METAL DETECTORS  
NOTE
: We specialize in metal detectors (
more food metal detector info) and always maintain a broad selection of used, refurbished, and new food grade METAL DETECTORS of different sizes and configurations (belt, drop-thru, pipeline) in stock, which tend to come and go faster than we can update them here; so if you don't see the size / configuration you're looking for here, CALL 315-589-4511 to check our current availability!  Also see our Alard FOOD GRADE METAL DETECTOR page for more information.

DETECTOR- metal, belt, 7 11/16"H x 20 5/8"W usable opening, Cassel Metalshark2, w/17.5"W x 87"L CONVEYOR w/belt-stop alarm reject, varispd, all SS, washdown, in-stock new. (Y5601)
DETECTOR- metal, belt, 7 11/16"H x 20 5/8"W usable opening, Cassel Metalshark2, w/17.5"W x 87"L CONVEYOR w/belt-stop alarm reject, varispd, all SS, washdown, NEW. (Y3358)
DETECTOR- metal, belt 7 15/16"H x 41 3/8"W usable opening, Cassel Metalshark2, w/86"L x 38"W CONVEYOR w/belt-stop alarm reject, variable speed, NEW. (Y3460)
DETECTOR- metal, belt, 10 7/8"H x  19 11/16"W usable opening, w/18"W x 72"L belt CONVEYOR w/reject, Cassel, all stainless steel, NEW! (Y2736)
DETECTOR- metal, belt, 15 11/16"H x 25.5"W usable opening, w/23.25"W x 104"L belt CONVEYOR, w/belt-stop alarm reject, Cassel, all stainless steel, usually multiple units in stock NEW. (Y5097)
DETECTOR- metal, belt, 15 11/16"H x 25.5"W usable opening, w/23.25"W x 104"L belt CONVEYOR, w/belt-stop alarm reject, Cassel, all stainless steel, usually multiple units in stock NEW. (Y5599)
DETECTOR- metal, belt, 15 11/16"H x 25.5"W usable opening, w/23.25"W x 104"L belt CONVEYOR, w/belt-stop alarm reject, Cassel, all stainless steel, usually multiple units in stock NEW. (Y5600)
DETECTOR- metal, belt, 15 11/16"H x 25.5"W usable opening, w/23.25"W x 104"L belt CONVEYOR, w/belt-stop alarm reject, Cassel, all stainless steel, usually multiple units in stock NEW. (Y3347)
DETECTOR- metal, belt, 18 3/8"H x 19.5"H usable opening, with 17.5"W x 72"L belt CONVEYOR, w/belt-stop alarm reject, Sesotec, all stainless steel, EXC. (Y5375)

DETECTOR - metal, drop-thru, 6 " diameter gravity-flow thru-tube, reject diverter valve, stainless steel, 5.6" color screen, Cassel, avail NEW! (Y3357)
DETECTOR - metal, drop-thru, 10" dia opening, food grade, all stainless steel incl touchpad operator control panel, Ceia mod THS21E, includes existing SS stand. (Y4958)

DETECTOR- metal, PIPELINE, 3 inch pipe, as-is head-only or we can complete, stainless steel, Fortress Phantom. (Y2576)
DETECTOR- metal, PIPELINE, 3 inch pipe, as-is head-only or we can complete, stainless steel, Goring Kerr DSP2. (Y2621)
DETECTOR- metal, PIPELINE, 4 inch pipe, with reject valve diverter, all stainless steel, Loma IQ2, reconditioned, ready to go! (Y2243)
DETECTOR- metal, PIPELINE, 6 inch pipe, with reject valve diverter, all stainless steel, Cassel Metalshark 2, EXC cond, ready to go! (Y4816)

DISINTEGRATOR, see HAMMERMILL below...


DEWATERING screens - see W  for WATER RECOVERY, and / or V  for Vibrating Screen or Vibrating Shaker, below...

DEWATERING shakers - see

DIP TANK -
see W  for "WASHER" below...

DRYER- BASKETS for Bock FP90 or FP95 SPIN DRYERS, qty(4), removable (with lift "ears"), all stainless steel, VERY good condition. (Y4572)

DRYER- spin, batch, NSEP / Bock FP-35, light plastic basket, 20 gallon 35 lb capacity, all SS, EXC/RTG. (Y5544)
DRYER- spin, batch, NSEP / Bock FP-35, light plastic basket, 20 gallon 35 lb capacity, all SS, EXC/RTG. (Y5546)
DRYER- spin, batch, NSEP / Bock FP-35, light plastic basket, 20 gallon 35 lb capacity, all SS, EXC/RTG. (Y5539)
DRYER- spin, batch, Heinzen / HMI SD-150, quantity(2) spinners with baskets, drive system & op ctrls, 150# per basket cap. (Y4372 Y4425 Y4426)
DRYER- spin, batch, TS Designs Iso-Dryer, light plastic basket, 32 gallon, up to 75 lb capcity, all SS, EXC/RTG. (Y5664)
DRYER- spin, batch, TS Designs Iso-Dryer, light plastic basket, 32 gallon, up to 75 lb capcity, all SS, EXC/RTG. (Y5663)

DUMPER- bin, all SS, 46"W x 48"L holder for up to 40" x 48" tote; NEW w/hydraulic pump, floor-level infeed, Alard BD40. NEW! (Y5527)
DUMPER- bin, all SS, 46"W x 48"L holder for up to 40" x 48" tote; NEW w/hydraulic pump, floor-level infeed, Alard BD40. NEW! (Z2993)
DUMPER- bin, all SS USDA sanitary smooth internal welds, 46"W x 48"L holder for up to 40 x 48" totes; NEW w/hydraulic pump, floor level feed, Alard BD40A. (Y5642)
DUMPER- bin, all SS USDA sanitary smooth internal welds, 46"W x 48"L holder for up to 40 x 48" totes; NEW w/hydraulic pump, floor level feed, Alard BD40A. (Y3771)
DUMPER- bin, all SS, 54"W x 48"L holder for up to 48"x48" tote; NEW w/hydraulic pump, floor-level loading. Alard BD48, in stock  NEW!  (Y5590)
DUMPER- bin, all SS, 54"W x 48"L holder for up to 48"x48" tote; NEW w/hydraulic pump, floor-level in-feed. Alard BD48, NEW!  (Z9456)
DUMPER- bin, all SS USDA sanitary smooth internal welds, 54"W x 48"L holder for up to 48 x 48" totes; NEW w/hydraulic pump, floor level loading, Alard BD48A, in-stock new. (Y5430)
DUMPER- bin, all SS USDA sanitary smooth internal welds, 54"W x 48"L holder for up to 48 x 48" totes; NEW w/hydraulic pump, floor level loading, Alard BD48A, in-stock new. (Y5640)
DUMPER- bin, all SS USDA sanitary smooth internal welds, 54"W x 48"L holder for up to 48 x 48" totes; NEW w/hydraulic pump, floor level in-feed, Alard BD48A. (Y3772)
DUMPER- bin, all SS, 60"W x 39"L holder for up to 48" x 48" bins, all SS, 58" in-feed height, w/hydraulic pump, refurbished, ready to go. (Y4088)




E - Extractors, Extructors
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

EXTRACTOR - also see "PRESS"



Click here for instructions!
A B C D E F G H I L M O P S T U V W
HOME   Email us     SEARCH

See our full GENERAL LISTINGS Page



F - Feeders, Fillers, Filters, Flumes
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .  

FEEDER- conveyor belt, with or without hopper: Also see CONVEYOR- BELT (above).

FEEDER- hopper-feeder: Also see HOPPER- FEEDER (below).

FEEDER- screw, incline, 12" diameter by 12'L screw, all SS, with hopper, covers, 1.5HP 3ph drive, excellent condition. (Y5495)
FEEDER- serew, inline, 26" diameter by 13' vertical lift, Vanmark Hydrolift, all SS, excellent condition. (Y4699)

FEEDER- vibratory:  See VIBRATING CONVEYOR and VIBRATING SHAKER  (below).

FILLER- bag, manual / hand-pack  BAG PACKING TABLE, 1 bag packing station, w/scale, bag holders, etc, all SS, see video, NEW! (Y0500)

FILLER- bag, manual / hand-pack
BAG PACKING TABLE, 2 bag packing stations, w/scales, bag holders, etc, all SS, in stock, NEW Alard BT2020. (Y5432)
FILLER- bag, manual / hand-pack BAG PACKING TABLE, 2 bag packing stations, w/scales, bag holders, etc, all SS, in stock, NEW Alard BT2020. (Y5693)
FILLER- bag, manual / hand-pack BAG PACKING TABLE, 2 bag packing stations, w/scales, bag holders, etc, all SS, NEW Alard BT2020. (Y4442)

FILLER- bag, vertical form-fill-seal (VFFS), Cryovac Onpack pouch filler for pumpable product, s/coder, film registration, in stock good condition. (Y5114)

FILLER- net weigh, semiautomatic, LOGICAL S-4, single lane linear scale, bulk & dribble weigher, digital scale, NEW. (Z5538)

FILLER- piston, 01 spout, Hinds-Bock, SP64, 32 oz fill per stroke, SS contacts, pneumatic, adj ht stand, EXC cond. (Y5065)
FILLER- piston, 01 spout, Unifiller 1000i Power-Lift, all SS, conical hopper, stand, foot-switch activated, pneumatic, EXC cond. (Y5366)
FILLER- piston, 01 spout, Unifiller 1000i Power-Lift, all SS, conical hopper, stand, foot-switch activated, pneumatic, EXC cond. (Y5367)

FILLER- pump, 01 valve, General Pkg  LPD25 gear pump filler for liquid, oils, creams, sauces, on stand, very good operational cond. (Y2929)


FILTER- basket, single, inline simplex strainer for 2 inch pipeline, 150psi, stainless steel, Tate Andale Mod FI-100-2-FLG. (Y0919)

FINISHER - see PULPER under the letter "P" below...

FLUME PUMP - Scroll down to see PUMP, FOOD below...

FLUME, WASH, 40'L x 18"W x 15"D open trough Meyer Hydrowash, with discharge shaker screen & recirc pump, EXC cond. (Y4418)
FLUME, WASH, jet, multi-nozzle, turbulent flow wash flume, 11'L x 31"W x 27" deep trough with water jet agitation, stainless steel, in stock new. (Y5113)

FLUME, WASH and CHILL, 24'10"L x 16"W x 8"D trough, w/plate chiller, (4) chill plates mounted o/h for full length chilling, all SS. (Y0799)
FLUME, WASH and CHILL, 40'L x 18"W x 15"D open trough Meyer Hydrowash, with discharge shaker screen & recirc pump, EXC cond. (Y4418)

FOOD PUMP - Scroll down to see PUMP, FOOD below...

 

G - Grader, Grading Reel, Grinder
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .


GRADER - also see BEAN GRADER, above.

GRADER - nut, split peanut blancher, Cantrell model 341B, cleaner, separator, grader, 1 ton/hour capacity, excellent condition, ready to go. (Y4152)

GRADER- optical color sorter, Bueller Sortex Niagara, mod NIAGD-213, cameras gone but rest of electronics appear intact, parts machine, as-is only. (Y4688)

GRADER, size, 34"W x 48"L, Key Iso-Flo vibratory screen for fines removal, size sorting, grading, all SS, in stock in EXCELLENT condition. (Y4113)
GRADER, size, roller, 30"L x 48"W Key Farmco SSR sliver sizer remover, all SS, crank adjustable size setting, in stock ready to go! (Y5670)
GRADER, size, roller, 30"L x 60"W Key Farmco SSR5 sliver sizer remover, all SS, crank adjustable size setting, in stock ready to go. (Y5316)

GRINDER, see HAMMERMILL below...


 

H - Hammermills, Heat Exchangers, Hopper, Hopper-feeder
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .


HOPPER-FEEDER, belt, 3'4"L x 28"W x 23"D tapered hopper with bottom belt discharge 59"L x 22.5"W, all SS, good cond. (Y4467)
HOPPER-FEEDER, belt, 8'6"L x 12"W, sm tapered hopper, cleated belt w/2"H cleats on 6" ctrs, 1HP, in stock new. (Y5514)
HOPPER-FEEDER, belt, 8'6"L x 12"W, sm tapered hopper, cleated belt w/2"H cleats on 6" ctrs, 1HP, in stock new. (Y5517)
HOPPER-FEEDER, belt, 11'Lx26"W, full flared hopper 48"W x 26" deep, all SS, 1HP 3ph roller drive, in stock EXC cond. (Y4381)

HOPPER-FEEDER, screw, incline, 12" diameter by 12'L screw, all SS, with hopper, covers, 1.5HP 3ph drive, excellent condition. (Y5495)

HOPPER-FEEDER, vibratory, 4'W x 4'L tapered infeed hopper to 70"L x 10"W vibrating even-feed conveyor, all SS. (Y2231)
HOPPER-FEEDER, vibratory, 4'W x 4'L tapered infeed hopper to 70"L x 10"W vibrating even-feed conveyor, all SS. (Y2232)



 

I - Inspection and Coring Conveyors / Inspect and Trim Tables (belt, roller, vibratory)
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .
 
INSPECTION CONVEYOR- belt, 09'L x 24"W, all SS, four-person w/6'L x 9"W wk surface ea side, in stock NEW! (Y5609)
INSPECTION CONVEYOR- belt, 09'L x 24"W, all SS, four-person w/6'L x 9"W wk surface ea side, in stock NEW! (Y5607)
INSPECTION CONVEYOR- belt, 09'L x 24"W, all SS, four-person w/6'L x 9"W wk surface ea side, NEW! (Y3289)
INSPECTION CONVEYOR- belt, 12'L x 24" W, all SS, w/9"W x 9'L trim shelves ea side room for 6-8 worker stations, in stock NEW ready to go! (Y5608)
INSPECTION CONVEYOR- belt, 12'L x 24" W, all SS, w/9"W x 9'L trim shelves ea side room for 6-8 worker stations, in stock NEW ready to go! (Y5610)
INSPECTION CONVEYOR- belt, 12'L x 24" W, all SS, w/9"W x 9'L trim shelves ea side room for 6 worker stations, in stock NEW ready to go! (Y3381)
INSPECTION CONVEYOR- belt, 15'L x 48"W, all SS, 7"H SS sides topped w/UHMW strips, air header under belt at dischg., VG cond! (Y3652)
INSPECTION CONVEYOR- belt, 17'8"L x 36"W main belt, THREE LEVEL, all stainless steel, 8-workstation ea w/coring knives. (Y4899)


INSPECTION CONVEYOR- roller, 8'L x 18.5"W, (9) person table with chutes to takeaway conveyors, all SS, varispd, like new. (Y5660)








L -Labeler, Label Printers, Lifts, Lines
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

L-BAR SEALER - see "WRAPPER" below...

LIFT, Scissors lift, Bishamon ECOA HLT-065-48-24064, mfg rated 6,500 lift capacity, in stock very good condition. (Z8321)




 

M -Mills, Mixers, Mushroom
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

METAL DETECTORS- see above under DETECTOR, metal...


MIXER- coating reel, tumble mixer, seasoning applicator, 30" dia x 67"L drum w/gentle flights, all SS, variable pitch, 3HP,  EXC cond. (Y4288)

MIXER- ribbon, twin-shaft, double ribbon, 60 cu ft / 450 gallon, 2 x 10HP,  6"sq slide gate discharges, all SS, A & M PROCESS Model DRB600. (Y0850)


 


O -Onion
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

ONION PEELER, Magnuson, trimmer, slitter, 4-roll finisher-polisher, dip tank, with connecting & waste takeaway conveyors, stainless steel. (Y3894)
ONION PEELER, Sormac model USM-1, topper-tailer trimmer, slitter, roll and blow air cleaning finishing, mfg rated to 100 onions per minute. (Y3775)
ONION PEELER, Sormac model USM-1, topper-tailer trimmer, slitter, roll and blow air cleaning finishing, mfg rated to 100 onions per minute. (Y3095)

ONION SLICER, Gering, carousel type, 36" dia wheel with (10) pockets, onion ring cutter, onion slab slicer, stainless steel, (Y5665)



P -Parts, Pasta, Pea Podder, Peeler-Washer, Peeler-Batch, Pumps
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .


PEELER-WASHER, BATCH, Heat & Control model BP36 high-capacity batch peeler 100 lbs per cycle, 36 inch disc, stainless steel. (Y3797)

PEELER-WASHER- 04 abrasive rolls, stainless steel, 3 HP electric chain-sprocket drive, 1,500-2,500 lb/hr potatoes, in-stock new. (Y5619)
PEELER-WASHER- 04 abrasive rolls, stainless steel, 3 HP electric chain-sprocket drive, 1,500-2,500 lb/hr potatoes, in-stock new. (Y5325)
PEELER-WASHER- 04 abrasive rolls, stainless steel, 3 HP electric chain-sprocket drive, 1,500-2,500 lb/hr potatoes, in-stock new. (Y5620)
PEELER-WASHER- 04 abrasive or brush scrubber rolls, stainless steel, 3 HP electric chain-sprocket drive, 1,500-2,500 lb/hr potatoes, new. (A0001)
PEELER-WASHER- 04 brush scrubber rolls, stainless steel, 3 HP electric chain-sprocket drive, 1,500-2,500 lb/hr potatoes, in-stock new. (Y5592)
PEELER-WASHER- 04 abrasive or brush scrubber rolls, stainless steel, w/full-length mobilizer, auger infeed / discharge, varispd hydraulic, Starr. (Y3857)
PEELER-WASHER- 24 roll, Magnuson NF-24, rolling cage with full-length metering screw, stainless steel, 2 x 7.5HP drives, 1HP auger, EXC cond. (Y4892)

PLATE CHILLER with flume - 24'10"L x 16"W x 8"D trough, (4) chill plates mounted o/h for full length chilling, all SS. (Y0799)

PRESS - SCREW press, dewatering, 12 inch, horizontal, Lyco FA-12, food grade, stainless steel, in stock, excellent cond (Y5235)

PROCESS TANK(s) - See TANK- processor... (below)


PUMP- centrifugal, size to order, 316T stainless steel, THOMSEN,; we're authorized dealers & WE STOCK NEW Models 5 & 6, and can order built-to-spec.... (DETAILS )
PUMP- centrifugal, 5" inlet / outlet, aluminum w/steel 3 blade impeller, flanged connections, CORNELL, Model 5FF-F5. (Z9954)

PUMP- lobe, 2.5" inlet / outlet, T316 SS, USDA food grade 3A dairy sanitary, positive displacement, Waukesha model 45 S2, VGC. (Y4951)

PUMP- food, 04", 6", 8", CORNELL, w/vortex tanks, NEW. We are authorized dealers & can build to spec. (MORE INFO )

PUMP- food, 04" CORNELL, stainless steel, 4NMP-F5K-SS, pump only, excellent condition. (Y3807)
PUMP- food, 04" CORNELL, stainless steel,, model 4NMPP-F5K-SS, expanded volute for delicate product, pump w/SS feed tank & 5HP belt drive, NEW. (Y4339)
PUMP- food, 04'" CORNELL, stainless steel, model 4NMPP-F5K-SS, expanded volute for delicate product, pump ONLY, NEW. (Z4665)
PUMP-food 04" CORNELL, stainless steel, model 4NMT-2R, standard volume, up to 2.94"dia x 4"L solids handling, pump only, VGC. (Y4636)

PUMP- food, 04'" CORNELL, model 4NMPP-F5K, expanded volute for delicate product handling, flume pump ONLY, in stock NEW. (Z6338)
PUMP- food, 04" CORNELL, model 4NMPP-F5K, w/5HP drive & SS feed tank, for delicate product handling, NEW! (Z2796)

PUMP- food, 06" CORNELL, stainless steel food pump mod 6NHPP-F16-SS, with SS feed tank, 7.5HP drive, delicate product, in stock NEW. (Y4820)
PUMP- food, 06" CORNELL, 316 stainless steel food pump mod 6NHPP-316-F16K, pump only, in stock, unused, LIKE NEW. (Y5558)

PUMP- food, 06" CORNELL, model 6NHHTA-F16K, pump ONLY, dual port, high-output food pump, in stock NEW! (Y5188)
PUMP- food, 06" CORNELL, model 6NHPP-F16K, pump ONLY, for delicate product handling, in stock NEW! (Z6340)
PUMP- food, 06" CORNELL, model 6NHPP-F16K, w/7.5HP drive & SS surge/balance/vortex feed tank, gentle product handling; in-stock new. (Y4996)
PUMP- food, 06" CORNELL, model 6NHPP-F16K, w/7.5HP drive & SS surge/balance/vortex feed tank, gentle product handling; NEW! (Z2795)
PUMP- food, 08" CORNELL, model 8NHPP-F18K,for delicate product handling, pump only OR with tank and drive, in-stock NEW! (Y4997)
PUMP- food, 08" CORNELL, model 8NHPP-F18K, w/10HP drive and SS in-feed tank, for gentle product handling; NEW! (Z2976)

PUMP- GRINDER pump, 1.25" outlet, SS cutter and impeller, 2HP, 220v 1ph, Liberty Omnivore, LSG202M, like new condition. (Y1646)

PUMP- lobe, 2.5" inlet / outlet, T316 SS, USDA food grade 3A dairy sanitary, positive displacement, Viking Wright-Flow TRA10 series, model 600, exc cond. (Y5341)
PUMP- lobe, .5" inlet-outlet, Waukesha model 2-LAB, lab sized pump with .25HP 1ph varispeed drive on SS base, USDA 3A dairy sanitary 316T SS pump, VG cond. (Y4457)
PUMP- lobe, 2.5" inlet-outlet, Ampco model ZP1-60, 3HP 3ph motor, SS base, USDA 3A dairy sanitary, parts interchangeable with Waukesha. (Y5469)
PUMP- lobe, 3.75"x6" rectangular flange infeed, 2" outlet, T316 SS USDA 3A dairy sanitary, 3HP motor, SS base, Waukesha mod 64. (Y1829)

PUMP - piston transffer pump, stainless steel, pneumatic, <>2.5 gal per stroke, Performance Mfg mod F17, on cart, refurbished. (Y5368)

PUMP- SHEAR: See "MIXER- SHEAR" above.

PUMP - SINE, Watson Marlow Masosine Model MR-135-RF, food grade sanitary SS,  positive displacement, w/3HP motor, SS base, EXC condition ready to go! (Y2701)



S -Scales, Separators, etc...
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

SCALE- linear, 1 lane, Logical S4, bulk & dribble netweigher, SS contacts, foot pedal, NEW. (Z5538)

SCREW FEEDER- VERTICAL, Vanmark Hydrolift, 16 inch diameter screw auger elevator, 16 foot discharge height, wet hopper, all stainless steel, 2HP, good cond. (Y4109)

STATIC SCREEN SEPARATOR - see WATER RECOVERY below...



T - Tanks, Tank Processor, Tomato, Tray, Tub
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

TANK- 0010 gallon, vertical, with Lightnin Mixer pneumatic agitator, open top w/covers, dish btm, dischg valve, all SS, EXC cond. (Y5389)
TANK- 0010 gallon, vertical, with Lightnin Mixer pneumatic agitator, open top w/covers, dish btm, dischg valve, all SS, EXC cond. (Y5388)
TANK- 0065 gallon, vertical, with Lightnin Mixer pneumatic agitator, 316L stainless steel, open top w/covers, dish btm, dischg valve, EXC cond. (Y5386)
TANK- 0065 gallon, vertical, with Lightnin Mixer pneumatic agitator, 316L stainless steel, open top w/covers, dish btm, dischg valve, EXC cond. (Y5391)
TANK- 0065 gallon, vertical, with Lightnin Mixer pneumatic agitator, 316L stainless steel, open top w/covers, dish btm, dischg valve, EXC cond. (Y5387)
TANK- 0065 gallon, vertical, with Lightnin Mixer pneumatic agitator, open top w/covers, dish btm, dischg valve, all SS, EXC cond. (Y5384)
TANK- 0065 gallon, vertical, with Lightnin Mixer pneumatic agitator, open top w/covers, dish btm, dischg valve, all SS, EXC cond. (Y5390)
TANK- 0065 gallon, vertical, with Lightnin Mixer pneumatic agitator, open top w/covers, dish btm, dischg valve, all SS, EXC cond. (Y5385)
TANK- 1580 gallon, vertical MIX TANK, 84"dia x 70: deep, single wall, dome top, slope bottom, all SS, 1HP bottom sweep agitator, 2"BSO. (Y3956)

TANKS - JACKETED / PROCESS TANKS


TOTE DUMPER -see DUMPERS above...

TRAY SEALER, Ilpra Speedy VG, vacuum, gas-flush, up to 10 cycles / min (1,2,3, or 4 trays per cycle dep tray size), all SS / USDA, EXC condition! (Y3466)
TRAY SEALER, Ilpra Food  Pack 1402 V/G, vacuum, gas-flush, up to 15 cycles / min, continuous, all SS, USDA. (Y5173)
TRAY SEALER, Orics VGF100, vacuum, gas-flush, up to 10 cycles / min (1,2,4,or 4 trays per cycle dep tray size), SS, USDA, EXCELLENT condition. (Y3712)

   

U - URSCHEL cutters, cutting machines, grinders, slicers, dicers, slicers, shredders, Comitrol Processor Mills; unloaders, etc...
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .
 

URSCHEL - We specialize in URSCHEL CUTTING MACHINES! (More URSCHEL info)

Urschel VIDEO DEMOS - see demonstration video of Urschel dicers, strip cutters, slicers and Comitrol processors at UrschelDemo.TV

URSCHEL- Comitrol mill, model 1700, 15HP, with cutting head, panel with safety interlock, excellent condition, in stock available for fast shipment. (Y4518)
URSCHEL- Comitrol mill, model 1700, 15HP, with adjustable slicing head, panel with safety interlock, excellent condition in stock available for fast shipment. (Y3873)
URSCHEL- Comitrol mill, model 3000, 30HP, with 3" cutting head, factory panel with safety interlock, excllent condition in stock available for fast shipment. (Y5483)

URSCHEL- dicer, Model G, GA, GK, GKA - If you don't see what you're looking for here, CALL 315-589-4511 for current availability.

URSCHEL- dicer, Model G-A, 3 dimensional cuber, strip cutter, 3-dimensional cuitter, 10" slice shell opening, good op condition. (Y5342)
URSCHEL- dicer, Model G, 3-dimensional cuber, french-fry strip cutter, 3-dimensional cutter, 10" slice shell opening, refurbished EXC cond (Y5318)
URSCHEL- dicer, Model G-A, 3 dimensional cuber, french-fry strip cutter, 3-dimensional cuitter, 10" slice shell opening, good op condition. (Y5490)
URSCHEL- dicer, Model GK-A, flat or crinkle cuts, french-fry strip cutter, 3-dimensional, 10" slice shell opening, USDA sanitary, all SS, refuurbished EXC cond. (Y5603)
URSCHEL- dicer, Model GK-A, flat or crinkle cuts, french-fry strip cutter, 3-dimensional, 10" slice shell opening, USDA sanitary, all SS, refuurbished EXC cond. (Y5505)
URSCHEL- dicer, Model GK-A, flat or crinkle cuts, french-fry strip cutter, 3-dimensional, 10" slice shell opening, USDA sanitary, all SS, refuurbished EXC cond. (Y5661)
URSCHEL- dicer, Model H, 3-dimensional cuber, strip-cutter, slicer for vegetables, fruits, etc, w/large product impeller, refurbished EXC cond. (Y4665)
URSCHEL- dicer, Model H-A, 3-dimensional cuber, strip-cutter, slicer for vegetables, fruits, etc, w/large product impeller, refurbished EXC cond. (Y4814)
URSCHEL- dicer, Model J, 2-dimensional dicing machine, strip-cutter, greens chopper, crouton cutter, refurbished, EXC cond. (Y5652)

URSCHEL- dicer, Model SL-A, 3 dimensional cutter for meat cubes, strip cuts, slices, excellent condition, ready go go! (Y4563)
URSCHEL- dicer, Model SL-A, 3 dimensional cutter for meat cubes, strip cuts, slices, very good condition! (Y4782)

URSCHEL- slicer, Model HS-A, knob adjustable for slice thickness,7" slice shell opng,  all SS USDA sanitary, refurbished. (Y5413)
URSCHEL- slicer, Model TRANSLICER cutter, w/safety interlock, factory panel, varispeed controls, refurbished to EXC & ready to go. (Y5554)
URSCHEL- slicer, Model W, French style bean-slicer, w/SS centrifugal feeder & oscillating aligning lanes, set 3/16". (Z9013)

 

V - Vibrating Conveyors, Vibrating Dewatering, Vibrating Grader, Vibrating Screens, Vibrating Shaker, Vibratory Feeders
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .
 
VALVE- pneumatic, 2" REMOTE CONTROLLED SHUTOFF VALVE w/Tri-clamp fittings, SS USDA/3A sanitary, w/Thinktop control top, ALFA-LAVAL. (Y0239)
VALVE- pneumatic, 2" REMOTE CONTROLLED SHUTOFF VALVE w/Tri-clamp fittings, SS USDA/3A sanitary, w/Thinktop control top, ALFA-LAVAL. (Y0240)

VIBRATING ALIGNER and FEEDER - 36"W x 8'L, 3"W x .75"H aligning ridges, non-stick dimpled rigidized surface, Key Iso-Flo, all SS, 1HP (Y5423)

VIBRATING FEEDER, 18"W x 7.5'L, 6"H sides, all SS incl legs, Key Iso-Flo vibratory conveyor, refurbished. (Y5034)
VIBRATING FEEDER, 18"W x 8.5'L, 6"H sides, all SS, ceiling mount,, Key Iso-Flo vibratory conveyor, refurbished. (Y5036)
VIBRATING FEEDER,18"W x 90"L, 6"H sides, Key Iso-Flo, with legs or ceiling mount, excellent condition. (Y5034)
VIBRATING FEEDER, 4'W x 4'L tapered infeed hopper to 70"L x 10"W vibratory even-feed conveyor, all SS, Hughes. (Y2231)
VIBRATING FEEDER, 4'W x 4'L tapered infeed hopper to 70"L x 10"W vibratory even-feed conveyor, all SS, Hughes. (Y2232)
VIBRATING FEEDER, 4'W x 6'L, rigidized dimpled sfc, all SS, Key Iso-Flo, floor or ceiling mount, vibratory feed conveyor. (Y4304)

VIBRATING SCREEN- round 48 inch diameter, all SS, Midwestern MR48S8-8, 2.5HP 3ph eccentric, NEW. (Y0119)

VIBRATING SHAKER, 48"L x 34"W, Key Iso-Flo vibratory screen for fines removal, size sorting, grading, all SS, EXCELLENT condition. (Y4113)
VIBRATING SHAKER, 56"L x 54"W, Olney, vibratorry screener for dewatering, fines removal, size sorting, grading, all SS, EXCELLENT condition. (Y4580)
VIBRATING SHAKER, 87"L x 24"W, Commercial, vibratorry screener for dewatering, fines removal, size sorting, grading, all SS, EXCELLENT condition. (Y4864)



W - Washers, Water Recovery, Wrapper
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .
 
WASHER, dip-tank, destoner, Vanmark Hydrolift, 16 inch diameter screw auger elevator, 16 foot vertical lift, wet hopper, all stainless steel, 2HP, good cond. (Y4109)
WASHER, dip tank, 28"L x 21"w x 31" deep, w/steep cleated elevating discharge and feed conveyor, all SS. (Y4757)
WASHER, dip-tank, 6'Lx2'Wx2' deep tank w/elevating discharge conveyor, all SS, with 3/4HP recirculation pump. (Y5248)

WASHER, flume w/plate chiller, 24'10"L x 16"W x 8"D trough, (4) chill plates mounted o/h for full length chilling, all SS. (Y0799)
WASHER, flume, 40'L x 18"W x 15"D open trough Meyer Hydrowash, with discharge shaker screen & recirc pump, EXC cond. (Y4418)

WASHER- jet, multi-nozzle, turbulent flow wash flume, 5'6"L x 20"W tank with water-jet agitation, stainless steel, EXC cond. (Y5550)
WASHER- jet, multi-nozzle, turbulent flow wash flume, 6'10" x 20.5"W tank with water-jet agitation, stainless steel, EXC cond. (Y5549)
WASHER- jet, multi-nozzle, turbulent flow wash flume, 9';8"L x 26"D tank with water jet agitation, stainless steel, EXC cond. (Y4499)
WASHER, jet, multi-nozzle, turbulent flow wash flume, 11'L x 31"W x 27" deep trough with water jet agitation, stainless steel, in stock new. (Y5113)

WASHER- spray tunnel, 22'L x 24"W SS belt with 1/8"x.3/4" openings, with recirc pump, air dry at dischg, GOOD cond. (Y2106)


WASHER- TOTE, lug, recycling bin washer, Douglas RBW74 rotary batch washer, all SS, w/20HP recirculation pump, 2 tanks, VG cond. (Y3146)

WASHER - TUMBLE, Commercial mod 8753, 136"L x 72" dia wash drum, 3/8" sieve, all stainless steel, 5HP, mfg rated 20 ton/hr on peppers. (Y4653)

WATER RECLAIM / LIQUID-SOLIDS SEPARATION / WASH-WATER RECOVERY EQUIPMENT - Click HERE for more info!!!

WASTEWATER grinder pump, 1.25" outlet, SS cutter and impeller, 2HP, 220v 1ph, Liberty Omnivore, LSG202M, like new condition. (Y1646)

WATER RECOVERY- dewatering shaker, round 48 inch diameter, all SS, Midwestern MR48S8-8, 2.5HP 3ph eccentric, in-stock NEW. (Y0119)

WATER RECOVERY PRESS - dewatering screw press, 12 inch, horizontal, Lyco FA-12, food grade, stainless steel, in stock, excellent cond (Y5235)

WATER RECOVERY- reclaim reel w/tank, 31"L x 14" dia drum, 1/16" perfs, 4'L x 23"W x 30" deep TANK, MS reel ends o/w SS, 3ph drive. (Y4449)
WATER RECOVERY- reclaim reel w/tank, 31"L x 14" dia drum, 1/16" perfs, 4'L x 23"W x 30"D TANK, SS contacts, external MS reel end o/w SS, 3ph drive. (Y4484)
WATER RECOVERY - reclaim reel w/catch pan, Commercial mod 8753, 136"L x 72" dia wash drum, 3/8" sieve, all stainless steel, 5HP. (Y4653)

WATER RECOVERY- static screen, hydrasieve, hydrosieve, 24"W x 36"L, sieve size to spec, Alardsieve liquid-solids separator scalper screener, all SS, in stock NEW! (Y5639)
WATER RECOVERY- static screen, hydrasieve, hydrosieve, 24"W x 36"L, sieve size to spec, Alardsieve liquid-solids separator scalper screener, all SS, NEW! (Z3200)
WATER RECOVERY- static screen, hydrasieve, hydrosieve, 36:W x 48"L, 1/8" sieve, parabolic, all SS, Lyco, EXC cond. (Y5559)
WATER RECOVERY- static screen, hydrasieve, hydrosieve,  48"W x 36"L, sieve size to spec, Alardsieve liquid-solids separator scalper screener, all SS, NEW! (Y5017)
WATER RECOVERY- static screen, hydrasieve, hydrosieve, 48"W x 36"L, sieve size to spec, Alardsieve liquid-solids separator scalper screener, all SS, NEW! (Z0947)
WATER RECOVERY- static screen, hydrasieve, hydrosieve, 72"W x 50"L, sieve size to spec, Alardsieve liquid-solids separator scalper screener, all SS, NEW! ( Z5697)

WRAPPER- L-BAR SEALER, food grade, all SS, 19"L x 13"W seal area, auto takeaway belt, heat shrink tunnel, Packall, like new. (Y3412)


 



CHECK BACK FOR UPDATES!!! 
For 63 years ALARD EQUIPMENT has been growing to better meet the needs of the Food Processing Industry. As part of this growth, we are continuously adding listings to our PARTIAL list of equipment items available. SO, save us to your bookmarks, and check back frequently to see our latest updates!

If you haven't seen what you're looking for, we may still have it, or know where to find it! Email us, or call us at 315-589-4511 to check for whatever equipment items you may need, or to let us know about equipment YOU have for sale.


 SEARCH the Alard website
Search our site.
search tips
advanced






See our General EQUIPMENT LISTINGS
See our
General EQUIPMENT LISTINGS




See our PRE-CUT PRODUCE PACKING equipment.
See our
PRE-CUT PRODUCE
EQUIPMENT LISTINGS



Watch ALARD.TV - the biggest thing on the small screen!
Watch
ALARD.TV



Sign up for our
NO MORE THAN MONTHLY
Email List




NO MORE THAN MONTHLY EMAIL sign-up

We won't share your Email address or other information with anyone, and we won't abuse your trust by sending constant nagging messages.Our Email updates are no-more-than-monthly.



Home button.
HOME
Email button.
EMAIL
US




 
 


INSTRUCTIONS
TO FIND AN ITEM

Equipment items on our listings page are in alphabetical order (Accumulating thru Wrapper), scroll the listings page until you see what you want,
--OR--
Look for the "alphabet" (see below) and click on the letter of the alphabet to jump to the part of the list you want to see...
 
 
  Click here for instructions!
A B C D E F G H I L M O P S T U V W


--OR-- click "SEARCH " to use our search feature....
 
 

TO SEE A PICTURE AND GET MORE DETAILS ON AN ITEM

Each listing has a "reference number" at the far right at the end of the line, the reference number is underlined and in blue, click on that reference number to see a picture and detailed description of the item.

Click here to return to top of page...