food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A.
all stainless steel...
on picture(s) to enlarge!
on picture(s) to enlarge!
New Alardsieve 4836 water recovery
screener / scalper sieve,
hydrosieve, for solids separation, wash-water filtration, and/or
waste-water recovery. A Hydrasive type static screen sieve for
separating solids from water and/or other liquids such as cooking oils.
This stationary screen is configured with a special triangular-rod /
wedge-wire screen specifically designed for liquid-solid separation
with very precise and consistent sieve opening sizes. Solids in a
liquid such as water or oil pass over the stationary screen. The liquid
passes through the screen to a collection tank and drain, leaving the
solids to pass over the screen for collection beneath.
An ideal separator for wash-water reclaim / reuse, by-product recovery,
and / or otherwise removing solids from waste water in industrial food
processing plant applications such as peeling, coring, and grading
operations for removing stems, seeds, leaves, and other foreign
materials from rinse water. Also commonly used in other municipal and
plant waste-water treatment facilities for solids removal filtration,
screening, filtration, dewatering, dehydration, desliming,
sieving, and filtration.
of this writing, this NEW solids separation / static dewatering screen
is in stock at ALARD and available for immediate shipment as configured
with .040 inch sieve opening screen.
- 48 inch wide by
36 inch long (top to bottom) wedge-wire screen.
- .040 inch
sieve-opening-size screen installed;
--other standard sieve opening sizes can be sourced and
order, from .010 inch to .100 inch, with other sizes to be priced upon
request. CALL 315-589-4511 to tell us YOUR sieve size specification.
- Screens are slide-out / slide-in interchangeable for a wide range of solids
- 33 inch deep full-width
infeed / head tank,
tapering from 20 inches front-to-back at the top to 15 inches front to
back at the bottom. The headbox is open and easily cleaned of debris
such as stones or other such "heavies".
- Complete with a dispersion shield over the weir
to spread water evenly across the
entire screen, for optimal laminar flow.
- 6 inch threaded
inlet, 8 inch threaded outlet;
--allows for optional flange fittings to be screwed on, or for hose
fittings to be cinched onto infeed and discharge connections.
- 5.5 inch diameter clean-out openings on either side
(for easy access behind screen).
- 1.875 inch diameter female threaded cleanout
drain in each tank at bottom level for comprehensive rinsing,
and drainage of wash water.
- Throughput capacity depends on screen sieve
opening chosen. For example, with a .040 inch (1mm) sieve opening, a
throughput capacity of approximately 840
gallons per minute capacity is
feasible running non-greasy solids (actual throughput will
solids and flow characteristics).
- All food grade
304 stainless steel construction.
- Static screen / stationary screen water recovery
sieve has no moving parts,
making it a low cost, low maintenance and
long-lived dewatering system.
CALL 315-589-4511 to confirm
availability and discuss your liquid solid separation needs.
item reference #: Y5017
Unless otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.