food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A.
hydro-transport FOOD PUMP...
on picture(s) to enlarge!
on picture(s) to enlarge!
Cornell 6 inch food pump with flanged inlet and outlet
Cornell Hydro-Transport Food Pump is an excellent foundation for a pipe
flume, open flume, wash flume, chill flume, disinfectant bath, or other
water conveyor configuration for gently conveying high volumes of whole
or cut food products in waterat tons-per-hour volume capacities.
Cornell hydro transport food pump is frequently employed to power open
food product transport flume systems, while others pump into a closed
pipe flume, which they run in a coil pattern on the ceiling to
floor space. The flumes provide hold time for chilling / to remove
heat, and extend
exposure to the water, which usually includes either a sanitizing
agent, or a preservative solution such as vitamin C; depending on the
product. The power of the Cornell Hydro-Transport pump allows food
producers to deliver their now chilled and treated ingredients to any
point in the plant where they want to dry, mix and pack the final
6NHTA-F18K cast-iron hydro flow food
pump with a two (2) vane mild steel impeller for higher flow rate and
HP capacity than a standard NHP model food pump.
- Six-inch inlet /
- Manufacturer rated for solids handling ability for products up to 3 inch diameter.
- Specifically designed and built for industrial
food processing application use with tons-per-hour
- Manufacturer recommends 2 or 3 to 1 ratio of
water to product, with your product capacity determined by horsepower,
RPM, and total dynamic head resistance. Pump curves are available by
request; --call 315-589-4511 to discuss your specific application
Others use the chill flume for
pre-cooling blanched food products in water prior to
running them through an IQF freezer tunnel. Others use the flume system
just to convey product in water. In every case, the powerful Cornell
pump can gently move high tons-per-hour output to wherever it needs to
go in the plant.
ALARD also stocks and custom-configures various kinds of dewatering,
solids-separation, water recovery and filtration equipment to recover
the food product from the pump water, and to recapture, treat and
recirculate the water as necessary, as well as drying and packaging
equipment to complete the process; all tailored to the end-user's
specific food product(s) and application. With Cornell's large range of
hydro-transport pump size and material configurations, and with ALARD's
ability to configure and "gear" the pump to the buyer's specific needs,
ALARD's Cornell Hydro-Transport food pumps are a superb tool for a wide
variety of industrial food processing applications.
As of this writing this unused 6 inch food pump is in stock at ALARD,
in LIKE NEW condition and available for immediate shipment.
CALL 315-589-4511 to
confirm current availability and discuss your particular food process
bulk product conveying, chilling, cooling, sanitizing and pumping
item reference #: Y5188
Unless otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.