food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A. 315-589-4511(voice)
Hydrosieve type, food grade stainless steel STATIC SCREEN / STATIONARY SCREEN
48 x 36 active sieve screen size
for solids separation, water reclaim,
oil or water recovery...
on picture(s) to enlarge!
A Hydrasive type static screen sieve
for separating solids from water and/or other liquids such as cooking
oils. This stationary screen is configured with a speical
triangular-rod / wedge-wire screen specifically designed for
liquid-solid separation screening, with very precise and consistent
sieve opening sizes. Product in water or oil passes over the stationary
screen. The liquid passes through the screen to a collection tank and
drain, leaving the solids to pass over the screen for collection
beneath. An ideal separator for wash-water recovery/reuse, and/or
solids from waste water in industrial food
processing plant applications such as peeling, coring, and grading
for removing stems, seeds, leaves, and other foreign materials from
SIEVE SIZES: Standardsieve size openings run from .010
to .100, with other sieve
sizes available to be priced upon request. The slide-out / slide-in
interchangeable sieve screen is mounted in the stainless steel cabinet
which includes an integral head box. Throughput rating for a .040 inch
screen (for example) is approximately 840 gallons per minute of water,
depending proportion and types of solids.
OPERATION: Water is fed through a 6
inch inlet port with an 11 inch flanged
connection, and builds in the head box until it overflows the weir and
acclerates down the screen. At the top of the screen is a hinged,
swing-up (for cleaning) dispersion baffle to help assure even, laminar
water flow. As the solids and liquid travel down the screen, liquid is
stripped away from the solids, flowing through the sieve screen and
back into the catch chamber of the cabinet where it is
discharged through a 8 inch diameter discharge outlet with a 13.5 inch
flange connection, at the back side bottom of the cabinet. Solids
continue down the screen due to the developed inertia, dropping off the
bottom edge of the screen.
SOLIDS REMOVAL: This type of
water screener is usually mounted such that a bin or tote can be placed
beneath the screen to catch the solids for removal (Alard can price a
stand, available separately, to your height specification).
CLEANING / SANITATION: The head box
is open and easily cleaned of debris such as stones or
other such "heavies" while there are 5.5" cleanout ports on each side
of the cabinet to allow access for cleaning behind the screen. There
are 1 inch drains with threaded female connections for washing /
rinsing the head box and recovered water tank.
Static screen / stationary screen water recovery sieve has no moving
parts, making it a low cost, low maintenance and long-lived dewatering
system for reclaiming process water in food processing and other
industrial process or municipal water treatment applications.
MATERIALS: All NEW food grade T304
stainless steel construction, screen AND cabinet.
with screen sized to buyer specification.
315-589-4511 for current
availability and to discuss your specific liquid screening application
item reference #: Z0947
otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.