Supplying food processing machinery for over 50 years, with over six warehouses of new and used food processing equipment IN STOCK!

Alard LOGO and home page link.
ALARD EQUIPMENT CORP.
6483 Lake Avenue
Williamson, NY  14589-0057  U.S.A.
315-589-4511 (voice)  315-589-3871 (fax)


 

IN STOCK NEW
4" and 6" CORNELL FOOD PUMPS
for immediate shipment!

CALL 315-589-4511 to confirm current availability and discuss your specific application need.



New and used Cornell hydro transport FOOD PUMPS in stock at Alard, 4NMP, 6NHP

Alard uses Cornell Hydro-Transport food pumps to build out “flume kits” to transport, chill, treat (with preservative solution for example), and / or sanitize (with chlorinated water) whole, or fresh-cut, diced, sliced, chopped and shredded food products. The "flume kit" includes a pump, feed tank, drive, and drive system sized to the buyer's specification.

This configuration is frequenly used by pre-cut produce packers. The split-second they cut their product, be it lettuce for salad mix for example, their shelf-life clock starts ticking, so they literally cut over a feed tank and drop right into chilled water to pull heat out of the product immediately. The Cornell expanded offset volute NHPP and NMPP pumps provide the gentle product handling they need to pump their tender, leafy fresh-cut products without bruising or damage.

Some of Alard's end-users employ open stainless steel flume systems, while others, pump into a closed pipe flume, which they run in a coil pattern on the ceiling to conserve floor space. The flumes provide hold time to remove heat, and provide extended exposure to the water, which usually includes either a sanitizing agent, or a preservative solution such as vitamin C; depending on the product. The power of the Cornell Hydro-Transport pump allows food producers to deliver their now chilled and treated ingredients to any point in the plant where they want to dry, mix and pack the final product.

Alard has other good customers who use Alard's “flume kit” for pre-cooling blanched (very lightly cooked to kill the active enzymes) food products in water prior to running them through an IQF freeze tunnel. Others use the flume system just to convey product in water.

In every case, the powerful Cornell pump can gently move high tons-per-hour output to wherever it needs to be. Alard also stocks and handles various kinds of dewatering, solids-separation, water-recovery and filtration equipment to recover the food product from the pump water, and to recapture, treat and recirculate the water as necessary, as well as drying and packaging equipment to complete the process; all depending on / tailored to the specific food product(s) and application.

With Cornell's large range of hydro-transport pump size and material configurations, with Alard's ability to configure and “gear” the pump to the buyer's specific needs, Alard's Cornell Hydro-Transport based flume kits are a superb tool for a wide variety of industrial food processing applications.

For more information, CALL 315-589-4511, to discuss your particular food process bulk product transport, cooling, treatment and sanitizing needs.




IN-STOCK-NEW CONFIGURATIONS
NOTE: Also available as pump only, or we can custom-configure a system for your needs.
For refurbished pump selection and availability, CALL 315-589-4511.


  • FOUR INCH FOOD PUMP / FLUME KIT - expanded offset volute (gentle handling for delicate products) Model 4NMPP-F5K hydro transport pump with vortex feed tank, 5HP drive; NEW (Z2796)
  • SIX INCH FOOD PUMP / FLUME KIT - expanded offset volute (gentle handling for delicate products) Model 6NHPP-F16K hydro transport pump with vortex feed tank, 7.5HP drive; NEW(Z2795)
We also carry pre-owned pumps in various sizes and configurations.
CALL 315-589-4511 for current availability,
and to discuss your particular application requirements.


Our "STANDARD" CORNELL FOOD PUMP CONFIGURATION...
New and used Cornell hydro transport FOOD PUMPS in stock at Alard, 4NMP, 6NHP

...INCLUDES:

  • AN all stainless steel VORTEX TANK,
     
  • with a belt and pulley drive,

  • all mounted  on a TUBULAR STAINLESS STEEL FRAME with the hydro transport pump.

We can also supply the PUMP-ONLY, or configure a drive, tank, and pump combination to your specifications.

CALL 315-589-4511 for current availability!




Cornell 10 inch hydro transport FOOD PUMP.


Other CORNELL FOOD PUMP models, and Cornell pump PARTS, available to order....


As Cornell Dealers, we offer the full line of Cornell pumps and parts to order, including smaller and larger hydro transport food pumps (3 inch, 8 inch and 10 inch models), water pumps, and etc.

CALL 315-589-4511 to discuss your Cornell pump application and/or parts requirements.






"Pump Curves"

Pump Dimensions


For all your industrial food process and food packaging needs,
CALL 315-589-4511



SEARCH the Alard Website
Search our website
search tips
advanced






See our General EQUIPMENT LISTINGS
See our
General EQUIPMENT LISTINGS



See our PRE-CUT PRODUCE PACKING equipment.
See our
PRE-CUT PRODUCE
EQUIPMENT LISTINGS




Recently acquired page button.
RECENT ACQUISTIONS


Watch ALARD.TV - the biggest thing on the small screen!
Watch
ALARD.TV



Sign up for our
NO MORE THAN MONTHLY
Email List




NO MORE THAN MONTHLY EMAIL sign-up

We won't share your Email address or other information with anyone, and we won't abuse your trust by sending constant nagging messages.Our Email updates are no-more-than-monthly.



Home button.
HOME
Email button.
EMAIL
US



Free markets, free people.