food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A.
WASHER / SCRUBBER / PEELER,
for fruits and vegetables,
4-roll, stainless steel, continuous,
on picture(s) to enlarge!
on picture(s) to enlarge!
continuous four roll peeler-washer
which can be fitted with any
combination of brushes and/or abrasive rolls for peeling, brush
washing, scrubbing, or finishing (e.g. in combination with
peeler or steam peeler) of fruits and vegetables such as
potatoes, beets, carrots, onions, cucumbers, pickles, apples, oranges
Raw product is continuously fed to the peeling chamber and subjected to
the spinning rolls (abrasive and/or brushes as the case may be). It is
important that a sufficient amount of product be kept in the peeling
chamber during operation for best results. Lubricating and rinsing
action is provided in the chamber by overhead sprays, while the flow of
product through the machine is regulated both by a weighted discharge
door, and the inclination of the machine.
As of this writing, this machine is IN
STOCK NEW at Alard, available for immediate shipment.
- 15 inch by 27 inch top hopper inlet opening in the
hinged stainless steel cover at 57 inch infeed height.
- Lubricating and rinsing action is provided in the
chamber via a stainless steel water
spray pipe header with spray nozzles.
- Peeled product discharges through a stainless
steel discharge flapper-gate which is adjustable
so product can be
subjected to a longer or shorter peeler /washing exposure; -- at
inch discharge height.
- Water, peels and debris drop to a full length stainless steel water catch pan
with a 6 inch by 6 inch center bottom outlet.
- Capacities run in the ton-per-hour range more or
less, depending on product and application (peeling, washing).
- Shows in pictures with four (4) abrasive rolls,
each 6 inch diameter by 6 foot long; but can be set with any
combination of abrasive or brush rolls to buyer need / specification
for stronger or gentler peeler / scrubbing action.
- The abrasive and/or brush rolls are mounted
parallel (in-line) with product flow.
- Complete with central
lubrication cluster for ease of maintenance.
- Chain / sprocket drive powered by a 3HP 208/230/460 volt 3 phase 60
cycle constant speed motor.
- We recommend an optional "soft start" variable
speed controller in a gasketed PVC NEMA 4 control box (available as an
option, call 315-589-4511 to discuss your needs).
CALL 315-589-4511 to confirm
availability and discuss your particular fruit and/or vegetable peeling
and washing equipment need.
item reference #: Y5104
Unless otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.